need suggestions - Page 2

**Dan** · 05-16-2007, 11:26 PM

no point upgrading to a pci-e graphics card like a 6800 or 7600 with that proc, even at 3 ghz its running at 400mhz fsb. plus to get a new board you will need to upgrade ram (your ram again, is too slow) a new harddrive (you have IDE, you need SATA), and a new proc (core2duo's are REALLY ****ING CHEAP!). There is no point upgrading you card with current system spec's, it would all just bottleneck and you wont get much of a preformance increase.

**The Mob** · 05-16-2007, 11:28 PM

like how cheap is the core 2 duo?
i think i may have been looking at the core 2 duo extreme.. b/c those are really expensive

**Dan** · 11:34 PM

core2duos are like 100-200now, you can get one that oc's to 3.2ghz on stock heatsink and fan (friend just did it) for only like 140$. core2 quads are comming down too, one is like 250$ if i remember right.

check out Newegg.com - Buy Computer Parts, PC Components, Laptop Computers, Digital Cameras and more!

OH SNAP DOES THAT COUNT AS AN ADVERTISEMENT??? PLZ DONT BANZOR MEH!

this is the one my friend got to 3.2ghz
Newegg.com - Intel Core 2 Duo E6320 Conroe 1.86GHz 4M shared L2 Cache LGA 775 Processor - Retail

**The Mob** · 05-17-2007, 12:11 AM

heh.. i post newegg links all the time on here.
whats the typical idle temp? is it less than a p4 northwood?

Smithy18 · 05-17-2007, 11:40 AM

well i think i might just save for a few months and buy a new comp cause i don't really have a clue what i need to do, sorry guys for wasting ur time but thankyou very much.

at least i found out my old mans comp is $h!t.

anyone know a good trusted site where u can build comps and buy in Australia?? i know of dell but just wondering if any others out there.

**Doom** · 05-17-2007, 12:47 PM

You should just really custom build your computer. Everything pretty much plugs into then holes on the mainboard and all you really need to do is read the specs on your board to see what you need exactly. I would never personally buy a prebuilt computer in my life because of all the problems they have and all the custom programs that come on them. I been building my own computers for about 2 years now and yah the first time was kind of confusing in a way but its well worth it. You get a lot more out of your money if you do it this way.

Smithy18 · 05-17-2007, 01:41 PM

yeh i was thinking that but knowing my luck i would stuff it up somehow. by custom build u mean start with a tower and work ur way up or just replace parts in this comp?

**Doom** · 05-17-2007, 08:23 PM

By custom i mean getting all new stuff and putting it together yourself. Your going to have to tell me what kind of case you have right now because sometimes cases can't be used again. Most of the times they can't if you got yours prebuilt by a company because most "good" mainboards are very large. You should just go to a local computer shop look for a good motherboard. One that can handle a lot like 4 gigs of ram and 2 graphics card slots "Pci express" or something of that sort.You know you can always build on it to make it better if you get a big mainboard.

Smithy18 · 05-17-2007, 09:43 PM

ok, all i can find on the case is a little sticker saying "A Case Open", is that the type of case? the only trouble with going down to a local computer shop is i live in a small town which doesn't have one and the closest is about 500km away so its abit hard.

**The Mob** · 05-17-2007, 10:07 PM

holy cow.. well that totally ruins the website links.. as all of them are american stores. i cant help you. sorry. but given your location, just stick with what you have for the time being.
i guess it is best for you to go local.
there are alot of guides on the internet on how to put a computer together. its not hard at all, and you will learn alot

Smithy18 · 05-18-2007, 06:39 AM

yeh sorry i didn't say that at the start lol, umm i was thinking of buying a tower case and every pay i get just buy a new thing like one week get a mobo and week after get a graphics card ect, this way i could slowly get a comp with out spending to much cash at once. Would that be an alright idea?

**Doom** · 05-18-2007, 08:42 PM

I like to buy it all at once to be honest. But thats also a decent way to go.

**Dan** · 05-18-2007, 09:13 PM

spit lives down under, so if I ever see him around i'll ask him what site he uses for computer parts.

**The Mob** · 05-18-2007, 10:18 PM

that would be a good idea, asking him. i honestly dont know how you are going to get the parts. it may be cheaper to get them all at once, say through a website, or to get them separately.

Smithy18 · 05-19-2007, 06:29 AM

yeh that would be great if u could ask him, yeh im not too sure how im going to get parts either lol. guess ill find some way.

**Dan** · 05-21-2007, 10:58 AM

Quote:

Originally Posted by Spitfire

staticice.com.au < Search for product gives multiple sites that have it listed by price

itestate.com.au
pcmaniacs.com.au
pccasegear.com.au
etc

Theres some website options for Aussie Land.

Smithy18 · 05-21-2007, 01:34 PM

cool thanks for that